Smart Drum Feeder
Smart Drum Feeder
It is a robot supply solution that provides an economical alternative to conventional vibratory feeders and reduces tooling changeover costs to supply products with simple orientation requirements.
MSDF-200H~
- Principle
-
- A drum is used at one end that provides recirculation and randomization of parts.
- Parts are pulled out of the drum of the linear tooling and are maintained by back pressure to act as a buffer.
- Characteristics
-
- Low cost
- Very small installation space
- Quiet operation with long-life tooling
- High grade sensor of linear tooling standards
- It can be easily redesigned for new or modified products.
- When changing tooling to supply different products, its cost is low.
- No vibration is transmitted to the machine base.
- Optional configuration: Hopper for storing and shipping parts
Dimension and specification
Drum Feeder 110
Drum Feeder 120
Drum Feeder 250 + Escape
Hopper Motor | 60W (Speed control type) |
---|---|
Hopper reducer | Horizontal type 1/180 (10㎜/s) |
Hopper capacity | 150 × 280 × 55㎜ |
Hopper control | Analog Type |
Drum Motor | 40W (Speed control type) |
Hopper reducer | Horizontal type 1/30 (60rpm) |
Drum diameter | 250㎜ |
Drum length | 330㎜ |
Discharge method | Line feeder WMI-01, 05 Escape after shoot |
Drum Feeder 350 + Escape
Hopper Motor | 60W (Speed control type) |
---|---|
Hopper reducer | Horizontal type 1/180 (10㎜/s) |
Hopper capacity | 190 × 480 × 220㎜ |
Hopper control | Analog Type |
Drum Motor | 60W (Speed control type) |
Hopper reducer | Horizontal type 1/20 (90rpm) |
Drum diameter | 350㎜ |
Drum length | 330㎜ |
Discharge method | Line feeder WMI-01, 05 Escape after shoot |